HELP-Yanmar MFWD
Pete
Join Date: Posts: 1 |
1999-10-24 9072
Howdy all, I was wondering if I could get some help. My Yanmar 276d is stuck in 4wd. I tried all the regular drive line bind tricks. There seems to be an excessive amount of plan in the 4wd lever, I can pretty much pull it back to the housing without disengaging. Any thoughts? What parts should be replace the remove all the slop from the selector?Many thanks,Pete
Reply to | Quote Reply | Add Photo
HELP-Yanmar MFWD
David
Join Date: Posts: 1 |
1999-10-24 9074
Sounds like you have sheared a pin or key somewhere in the 4wd linkage. Start by looking at the lever connection to the shaft. If thats not it its going to be a problem inside the transmission. For more detailed info contact us. we can fax you a parts breakdown if need. Affordable Equipment 864-859-2623 ....
Reply to | Quote Reply | Add Photo
HELP-Yanmar MFWD
Roger L.
Join Date: Jun 1999 Posts: 0 |
1999-10-24 9081
My 336D did the same thing this weekend. On mine it turned out to be a loose pin where the hand lever attaches to the shaft. A five-minute fix for me...Hope you are so lucky. I've heard that some need a new retaining clip where the shaft enters the transmission housing and slides a collar back and forth to engage/disengage 4wd. From what I have been told, the work can be done simply by removing an inspection cover - but I haven't had the need to try it. Roger ....
Reply to | Quote Reply | Add Photo
Go Top
Share This